|
SUPPORT HELPDESK - KNOWLEDGE BASE
|
The IraqSat Knowledge Base is a respository of
information designed to assist our engineers and
technically-literate customers. The following articles contain
technical data covering a wide range of topics, from VSAT basics
to tips for dealing with specific hardware. In some cases, this
information is repeated from other technical literature. IraqSat
does not guarantee that the following information is accurate or
true. Use at your own risk.
Customers who use the information within these articles to
modify their systems without approval from IraqSat violate the
terms of their warranty. Any damage caused by such actions is
entirely the responsibility of the customer. In the event that
IraqSat is required to repair said damage, the customer will be
billed in full for all work performed and equipment replaced
|
| VSAT Terms and
Acronyms |
| Date: |
Created 2004.12.28, last updated 2005.06.15. |
Summary:
|
Industry professionals use many technical terms
and acronyms to describe VSAT hardware and performance. See this
article for a list of the most common terms, with explanations. |
|
| DW7000 Rx/Tx Codes |
| Date: |
Created 2007.04.01. |
Summary:
|
Hughes DW7000 systems use a numbered code system
to describe the state of the transmitter and receiver functions.
Understanding these codes can help you diagnose a problem with
your VSAT. DW7000 codes use the same numbering scheme as other
DirecWay hardware, but may not use some codes and have minor
differences in debugging steps because of the different
hardware. |
|
| DW6000 Rx/Tx Codes |
| Date: |
Created 2005.01.02. |
Summary:
|
Hughes DW6000 systems use a numbered code system
to describe the state of the transmitter and receiver functions.
Understanding these codes can help you diagnose a problem with
your VSAT. DW6000 codes use the same numbering scheme as other
DirecWay hardware, but may not use some codes and have minor
differences in debugging steps because of the different
hardware. |
|
| DW4020 Rx/Tx Codes |
| Date: |
Created 2004.12.30, last updated 2005.01.02. |
Summary:
|
Hughes DW4020 systems use a numbered code system
to describe the state of the transmitter and receiver functions.
Understanding these codes can help you diagnose a problem with
your VSAT. DW4020 codes use the same numbering scheme as other
DirecWay hardware, but may not use some codes and have minor
differences in debugging steps because of the different
hardware. |
| |
|
| |
|
| |
 |
